Koyo one-way bearing material selection of important influence on life

The service life of the one-way bearing and use level depends largely on the material. The kinds of bearing material, using parameter has been improved. With the development of modern industry, the operation condition of bearing more and more demanding, such as high temperature, low temperature, high pressure, strong corrosive medium, flammable and explosive medium and so on, so of the one-way bearing material requirements is higher and higher also. Correct selection of bearing material, especially the ring and static ring, auxiliary materials, to guarantee the normal work of the KOYO bearing, extend the service life of bearing has very important significance. 1. KOYO bearing installation of bearing installation is correct, affect accuracy, life and performance. Therefore, for installation of KOYO bearing design and assembly for fully study the following conclusions, standard of work is usually as follows: do not allow a powerful punch, are not allowed to directly with hammer percussion one-way bearing, not allowed by transfer roller pressure. B using appropriate and accurate installation tools use a special tool, as far as possible to avoid use cloth class and short fiber, things like that. C try to keep the KOYO bearings and the surrounding environment clean even invisible to the naked eye the smile of the dust into the one-way bearing, also will increase the wear of bearings, vibration and noise. D to prevent rusting of the bearings directly with the hand take bearing, to fully wash hands sweat. And after coated with the high quality mineral oils, especially in the rainy season and summer to pay attention to rust. 2. Basic condition monitoring bearing in use process, should be regular monitoring of KOYO bearing operation basic external conditions, such as temperature, vibration and noise measurement, etc. The periodic inspection will find potential problem and stop the machine as soon as possible, to prevent accidental phenomena, make production plan, improve productivity and efficiency of the factory. 3. To bearing lubrication one-way bearing during operation, need to correct again, KOYO bearing lubrication, to improve its performance. One-way bearing lubrication method, divided into grease lubrication oil lubrication dominant. However, in order to simplify the bearing grease is about the structure of professional knowledge. KOYO bearing short and thin also decides the axial stiffness of it is very good, the deformation of axial is generally not, but a bad image, so the processing time to consider from very attentively.