KOYO bearing overheating considerations and solutions

Although KOYO bearing quality and so on various aspects are good, but the rolling bearing is precision components, its use should be measured accordingly. No matter how high performance bearing use, if use undeserved, will not get the desired performance. Attention about the use of the bearing has the following several: ( 1) Keep the bearing and the surrounding clean. Even the eyes can't see the little dust, will also bring bad influence to the bearing. So, keep the surrounding clean, dust from invading bearing. ( 2) Carefully use. In use for bearing strong impact, will produce scar and creasing, become the cause of the accident. Severe cases, can crack, fracture, so must pay attention to. ( 3) Use the appropriate operating tools. Avoid to existing tools to replace, must use the appropriate tools. ( 4) To pay attention to the corrosion of the bearing. Operating KOYO bearing, hand sweat will become the cause of rust. Pay attention to the operation with clean hands, it is better to try to bring gloves. Multistage pump long time operation will bring about bearing overheating situation, details of which will cause bearing overheating? 1. Installation or test whether when the pump shaft and motor shaft concentric, shock caused different heart pump shaft and motor shaft bearing overheating. 2. KOYO bearing damage, the bearing overheating. Replace the new bearing. 3. Packing aging, scratch collar cause overheating transfer heat affect the bearing temperature. 4. Bearing lube. Too much too little will make bearing overheating. 5. Multistage pump bearing too little transparent lube oil or leakage can make bearing overheating. 6. The spoiled or lubricating oil into the water tank, and can make the bearing overheating. 7. Bearing cooling water is not enough or intermittent, KOYO bearing overheating. 8. Multistage pump produced angry corrosion pump body, bearing temperature, etc.