KOYO bearing lubricants knowledge of inspection method, the bearing

When we inspection on KOYO bearings before, should first clean the surface of KOYO bearing, and then remove the KOYO bearing the perimeter of the parts. Oil seal is very fragile parts, so when checking and disassembling need to be careful, don't be too much work, so as not to cause damage to the parts. Then carefully check KOYO bearing oil seal and its surrounding parts, if has presented the adverse symptoms, be sure to replace, and bad seal will cause the damage of KOYO bearings, KOYO bearing cloud not to normal and cause of equipment downtime. So KOYO bearing should check those? Check method is: about KOYO bearing lubricant with little lubricant in friction between two fingers, and if the presence of pollutants, can be felt; Or in the back of a thin layer of lubricant, then seal of inspection. Used engine oil lubrication KOYO bearings after xie used engine oil, if possible, shall be impregnated with fresh oil and let the machine in low speed rotation for a few minutes. As far as possible make the oil collecting residual pollutants, and then purging in addition to the oil. And use of grease lubrication KOYO bearing in replacing grease, Joe used in addition to the device should be avoided with any part of the cotton by Angle to KOYO bearing. Because these residues fiber may wedged in between the scroll and damage, especially small KOYO bearing applications need more attention to this problem. Check the KOYO bearing, don't let KOYO bearing exposure to pollutants or moisture environment. If the job is interrupted, should with oil film, paper or similar material by machine. If don't have to remove and may perform inspection of cleaning without masking KOYO bearing, to clean with brush with petroleum solvent coating, then dry with a lint-free cloth or with compressed air to blow dry. Do not clean the encrypted block or dust KOYO bearing; You just wipe the outer surface. If the KOYO bearing is need to replace damaged situation. In regular maintenance downtime period change than the array bearing KOYO bearing damage selected into a sudden shutdown loss much more economical.