KOYO bearing dismantling matters should be paid attention to

1. Assembly site should be kept clean, no dust. 2. To avoid KOYO bearing from dust, moisture and contaminants - Pollutants of KOYO bearing is bad operation and service life. 3. Check the bearing hole and the shaft with the following: geometry and dimensional accuracy, and cleanliness. 4. For bearing ring mating surface coated with a little oil or a little fat. 5. To ensure that the shaft and bearing hole has a 10 degrees - Guide the chamfering of 15 degrees. 6. Don't be cool bearing: condensation of water can lead to bearing and the bearing of mating surface rust. 7. After installation: for bearing loading lubricants, check whether the bearing configuration is working properly. Remove the guide in the original KOYO bearing installation site design should take into account the disassembly problem - If the bearing use interference fit to install, the shaft or the bearing hole should be set in the disassembly with groove in order to remove the ring. If removed bearings and to use: 1. Should avoid direct hit the bearing ring, 2. Remove the force should not pass through body, 3. Once a KOYO bearing is removed, it must be carefully cleaned and can't use 'fierce' flame.