Introduction to non-standard bearing manufacturing maintenance lubrication method

Introduction to non-standard bearing manufacturing maintenance lubrication sources: bearing | last updated: - 2020 07 - 16 introduction to maintenance of non-standard bearing lubrication way according to the area of use and conditions of use and environmental conditions choose size, precision, with appropriate non-standard bearings is the prerequisite of bearing life and reliability. Use parts: non-standard bearing is suitable for predominantly radial load under the combination of radial and axial load, usually with two sets of non-standard bearing pair is used, should be mainly in car wheel hub, before and after active transmission parts, such as bevel gear, differential, reducer. Allows speed: under the correct installation, lubrication good environment, allowing for bearing limit speed of 0. 3 - 0. 5 times. Generally under normal circumstances, with 0. 2 times the limit speed for the most appropriate. Allows tilt Angle: non-standard bearings generally are not allowed to have tilted axis relative to the shell hole, if there are any tilt, no more than 2 'biggest. Allow temperature: under normal load, and lubricant has a high temperature resistant performance, and abundant lubrication conditions, general bearing in - are allowed 30℃- Work under the temperature 150 ℃.