Insert ball bearing unit used to produce the temperature of the maintenance and maintenance

Insert ball bearing, in general, will heat up, since we started running in over a period of time, that is, at a lower temperature ( Usually higher than the room temperature 10 ~ 40 degrees) In the norm. To the normal time, depending on the bearing size, form, method of rotation speed, lubrication, bearing the surrounding conditions change and different, generally it takes 20 minutes to several hours at this time. Insert ball bearing temperature warms up do not meet the normal and abnormal, can consider to the following reasons, moreover should stop and take the necessary measures as soon as possible. To keep the set-contained bearing temperature spherical bearing the appropriate life and prevent oil degradation is crucial, advice: try to control in the high temperature condition ( Is 100 degrees commonly the following) Use the most ideal. 1, bearing during operation, to fully guarantee the lubrication, and according to the actual usage add lubricating oil regularly, not long time cutting oil. So, for the user enterprise, should choose a better, more suitable lubricating oil. A new special oil can significantly improve the lubrication performance, extend the oil change period, prolong the service life of insert ball bearing, also has good anti-rust, anti-corrosion performance, etc. 2, with reinforced nylon materials bearing cage, using temperature should be lower than 120 ℃, it is strictly prohibited to cooking oil to clean. 3, maintenance should be paid attention to when cleaning methods to prevent damage or scratch the surface of the roller. Try to remove insert the remains of the spherical bearing parts, flushing, suction bolsters internal clean should be adopted the method of residual oil is preferred. Attention should be paid to avoid the dumping of type and make the clean garbage accumulation residue in bearing parts, lead to insert ball bearing unit to produce the problem such as noise, wear failure.