INA import bearing removal methods and the use of the environment

Bearing disassembly: INA import bearings removed after plans to continue to use, should choose the proper removal tool. Remove the interference fit ring, can only add tension on the ring, will never allow through transfer roller disassembly force, rolling element and raceway will be crushed. Bearing the use of the environment: according to the area of use and conditions of use and environmental conditions choose size, precision, with appropriate INA import bearings is the prerequisite of bearing life and reliability. 1, use parts: tapered roller bearing is suitable for predominantly radial load under the combination of radial and axial load, usually used in two sets of bearing pairs, mainly should be in the car before and after the wheel hub, active transmission parts, such as bevel gear, differential, reducer. 2, allows speed: under the correct installation, lubrication good environment, allowing for the INA import bearing limit speed of 0. 3 - 0. 5 times. Generally under normal circumstances, with 0. 2 times the limit speed for the most appropriate. 3, allows tilt Angle: taper roller bearings are generally not allowed to have tilted axis relative to the shell hole, if there are any tilt, no more than 2 '. 4, allow temperature: under normal load, and lubricant has a high temperature resistant performance, and abundant lubrication conditions, general INA bearings allow imports - 30℃- Work under the temperature 150 ℃.