INA bearing maintenance - bearing knowledge on water pump

INA bearing a lot of maintenance are the same, but each industry is different, it also has different maintenance. Today I will to introduce the INA bearing on the pump maintenance. ( 1) New pump put into use, must be replaced after running 100 hours (grease Oil) 1, 500 hours after each run. ( 2) Flow INA bearing is lubricated by grease, run after 1500 hours, should be replaced, grease filling the oil amount is too little or too much, because too much or too little can cause fever, INA bearing grease amount generally in INA bearings should be 1/2 ~ 2/3 of the chamber volume. ( 3) For INA bearings used lubricating oil, oil should be added to the specified location. ( 4) Containers of lubricating oil or grease to clean, should be sealed at ordinary times, should not have dust, iron and other sundry, lest damage INA bearings. ( 5) Motor INA bearings commonly used sodium base grease, this kind of ability is the feature of high temperature grease ( 125℃) , but easy to dissolve in the water, so can't use it for water pump INA bearing lubrication