IKO import bearing maintenance overhaul and damage countermeasures - bearing knowledge

1, IKO import bearings of maintenance, repair, and exception handling for as long as possible in good condition to maintain the performance of the bearing was required to maintenance, repair, in order to prevent accident arrangement to ensure the reliability of operation, improve the productivity and economy. To maintain the best conditions of mechanical operation of the corresponding operation standard, on a regular basis. Contents include, monitoring operation status, supplement or replacement of lubricants, remove the check on a regular basis. As maintenance issues in the operation, have bearing the rotation of the sound, vibration, temperature, the state of the lubricants and so on. 2, IKO import bearing damage and countermeasures in general, if the proper use of bearings, can be used to achieve fatigue life. But there will be unexpected injury prematurely, not resistant to use. This early damage, as opposed to a fatigue life, is called the quality using limit of fault or accident. Much due to the installation, use, do not pay attention on the lubrication, intrusion of foreign bodies from outside, to the shaft, shell heat affected study enough. About IKO import bearing damage status, such as: roller bearing ring guard card, as a reason to consider, lack of lubricant, not suitable for, for the defect of oil discharge structure, foreign invasion, bearing installation error, the deflection of the shaft is too large, also can have these reasons. So just to look at IKO import bearing damage, damage is hard to come by. The real reason. However, the use of machinery, if you know the bearing conditions of use, bearing the surrounding structure, to get hold of before and after the accident, combined with several damage status and causes of bearing, can prevent the similar accident happen again. About IKO import bearing the use of the matters needing attention are as follows: keep the IKO import bearings and its turnover clean even the eyes can't see the little dust, will also bring bad influence to IKO import bearings. So, to keep the surrounding clean the dust from invading IKO import bearings. Carefully use in use for IKO import bearing strong impact, will produce scar and creasing, become the cause of the accident. Severe cases, can crack, fracture, so must pay attention to. Use appropriate IKO import operation tools to avoid in the work of the existing bearing to replace, must use the appropriate tools. We often stressed the importance of tools, because there are too many customers in the installation using the wrong tool for the IKO import bearing damage. To pay attention to the corrosion of IKO import bearings operating IKO import bearings, sweat will become the cause of rust. Attention should be paid to operation with clean hands, best gloves as far as possible.