IKO import bearing fault handling and checking method of bearing

IKO import bearing is an important part of a major industrial equipment. Bearing problems may lead to costly downtime, equipment damage and failure. In addition, a large industrial bearing on behalf of a large amount of capital investment. In order to achieve high equipment performance and the lowest maintenance cost, reliable running, must follow the correct processing method. This includes bearing storage, removal, cleaning, testing and installation. Any IKO import bearings service life depends largely on the preventive maintenance and received it. This especially in industrial applications, often working conditions, heavy load, dust and pollution is a common size. Apply to all anti friction bearing design. IKO import bearings for bearings with special anticorrosive coatings to choose from, but most of the bearing is not corrosion resistant materials. In handling and storage of bearings, must be careful, to ensure that they will not rust or corrosion. Even if it is wet or unprotected left hand or a small amount of chemical gloves can lead to etch in a small area, it could cause bearing fatigue. New and restructuring IKO import bearings have a protective coating to deliver goods, usually in a protective cover paper or other packaging, and in a carton or wooden cases. When receiving a new bearing or restructuring, not from the packaging, until ready to install in the application. Do not stored directly on the concrete, here you can condensate collection and bearing. Store shelves tray or bearing, bearing there won't be high humidity or a sudden and severe temperature changes, may cause condensation formation of the area. Always put the oiled paper or, if not, the roller taper roller bearings and plastic cup game. Each type of IKO import bearing design with unique removal process. Regardless of the bearing type, bearing must be particularly careful to be deleted. If improper operation, it might damage the bearings, shaft or shell, require expensive maintenance. For smaller bearing, a driver can help bearing removal, etc. To work closely with, or press, or have been locked in a shaft of place, can't use mechanical dismantling bearing drawing machine, bearing inner ring can be heated, to alleviate the relocation. Heat lamp or other heating equipment can be used. If a torch, it can change the performance of the bearing steel and bearing must be discarded.