IKO high-temperature bearing machinery in use process performance requirements

High temperature bearing ring and heat treatment process to ensure that roller bearing within the 150 - degree, size stability. For higher working temperature, need to use special heat treatment method. If IKO bearings used in corrosive environment, you need to bearing steel are corrosive. Made of stainless steel standard bearings in the code to add prefix 'S' and the suffix 'W203B'. This the main dimensions of the bearing and the overall quenching bearing steel bearing and the bearing capacity is the same. In order to maintain its corrosion resistance, in the process of installation and use of the surface cannot be damaged. Silicon nitride balls used in ceramic production main shaft bearing. Ceramic ball is much lighter than steel ball, centrifugal force and friction is significantly smaller than steel ball. When the IKO bearing grease lubrication in still can achieve high speed, and long service life, low working temperature. High-temperature bearing seal performance is an important factor to ensure effective sealing, choose sealing material, mainly according to the working environment of the potted component, such as using temperature, working pressure, the working medium used as well as the movement way and so on. The basic requirements for sealing material is as follows: 1. High temperature bearing wear resistance, no corrosion metal; 2. Oxygen resistance and aging resistance, durable; 3. High temperature bearing resistance to high temperature and low temperature, high temperature decomposition, softening, low temperature not hardening; 4. High temperature bearing to adapt themselves to the working medium, do not produce swelling, decomposition, hardening, etc; 5. Flexible and appropriate hardness, compression permanent deformation small; 6. High temperature bearing has certain mechanical properties such as tensile strength, elongation, etc; 7. Easy to forming, price is low;