IKO bearings with knowledge of the difference between oil and processing oil - bearing

With the development of our country industry, industrial production from heavy steel, power generation, precision instrument manufacturing and textile industry, oil vary widely in all walks of life, and the use of mechanical equipment and process conditions vary, therefore, for the use of lubricant requirements are different. Industrial lubricants include a very wide range of varieties of lubricating oil and the actual application fields. , though, there are many varieties, the main varieties, such as: steam turbine oil, IKO bearing lubricating oil, hydraulic oil, gear oil, machine oil, grease, metal processing liquid, textile with lubricating oil, quenching oil, heat conduction oil, electric oil, frozen oil, rust-proof oil, etc. , widely used in industry, and is widely familiar varieties. The lubricant products in use today can be roughly divided into two categories, which is the lubricant of industrial machinery and industrial production process of agents. Pure for gear oil belongs to the former, the role of the lubrication; Quenching oil belongs to the latter, when the hot steel quenching oil, the oil can quickly 'take away the quantity of heat of steel, it also ACTS as the process of oil. In which quenching oil allow steel hardening, but do not need lubrication. In other words, the oil is used as a cooling steel ingot and not used as a lubricant. In most cases, the lubricant lubrication and cooling effect at the same time, therefore, to put a product accurately divided into pure oil or oil it is difficult to process. , for example, is used in metal processing technology of pure cutting oil has a dual role. It by reducing the friction between the tool and workpiece lubricant; At the same time, because it itself has the cooling capacity and the role of the process of oil. However, metal cutting oil is generally classified as process oils. 'Process agent' means don't need to at least the lubrication. What we call 'lubrication' is a relative movement between the two each other off the surface of the skill. In this way, prevent metal wear due to avoid contact with each other. This state is usually called fluid lubrication. However, due to the load or the characteristics of all kinds of machinery and mechanical principles of force, also may appear lubricating film rupture caused by wear and surface damage. Under the condition of this state is called the 'boundary', if there are other lubricating property, can avoid this kind of damage. So, the industrial lubricant mainly according to the conditions of application - — Fluid or boundary ( Sometimes two both) Conditions, the appropriate choice. Such as turbine oil, hydraulic oil, gear oil, grease, machine oil and metal cutting oil and steel with heat treatment process, which includes the most characteristics of industrial oil. And for industrial lubricants in various occasions, chemical stability, thermal stability, reduce the friction and resistance load capacity ( Including extreme pressure lubricant) Is the most common requirements. Due to industrial development along with the development of the higher efficiency of industrial equipment, and a higher load, speed and temperature. At the same time, make the oil more harsh working environment; And therefore increased the performance requirements of lubricating oil. But for most of the industrial application, with mineral oil, Hydrocarbon) To be made on the basis of the liquid products are an appropriate gift. In some special occasions, with synthetic oil ( Non hydrocarbon) , and in some cases, the need to use solid lubricant. Characteristics of these different types of lubricant products and the further research and development.