IKO bearing plane in using smooth fat pay attention to matters

Smooth in the process of plane bearing the use of this process is better than cannot little, but smooth way and there are a lot of, all kinds of smooth way should pay attention to the problem in the process of smooth also each are not identical, this has led the use of confusion, introduce you to everyone here today IKO bearing oil smooth and smooth the advertent items what are fat. 1, best to smooth smooth IKO bearing of smooth fat is in the plan of equipment downtime, and periodically stop supplement, at the same time, the old oil clean up empty or via the drain the old oil. Before attend the novel grease injection nozzle should be wiped clean. If surface bearing housing does not have zerk, should open bearing box cover or end cover, in order to remove the old oil, after the liquidation, novel complement the same type of grease. 2, smooth oil smooth smooth oil regularly check the oil level and oil, ordinary conditions, normal oil level should be equipment oil level Windows or mark a third - Two-thirds of the range. Oil compensating way for oil cup, the oil level appeared only represent oil compensating ability, and IKO bearing box oil level is to satisfy the request of operation, oil cup CPC a lower than a quarter of its total volume can be thought to fill oil. To check and fill oil, remove and smooth a small amount of oil as a sample and novel smooth oil stop match, a unit of talent can be thought to stop oil testing, to ensure the oil qualified. If sample seemingly cloud-like, so may be mixed with water as a result, namely we often say that oil emulsification, smooth oil should be changed at this time. If the sample cheng dark color or thick, it may show smooth oil were beginning, carbide old smooth oil should be stopped completely changed. If possible, using the novel smooth oil to stop washing oil. Smooth oil change, to ensure smooth oil change by the new and the old model is the same, meet the request of adding oil level. Use a flat within the bearing grease must have antirust effect, rust inhibitor is best can not dissolve in water. Grease should have good adhesion force able to form a layer of oil film on steel appearance, even if grease filled with water can be maintained. Grease in machining will become soft, cause leakage. When there is a application example of vibration, grease will by IKO bearing to the bearings. If the mechanical stability of the oil is insufficient, grease will from time to time thrown outside the bearing, it will make the structure of the soap production dynamic machinery disintegration and apply grease is destroyed.