Identify who the cervix thermometer of glue and the method for the bearing failure!

To make the bearings and keep its long-term performance into full play, must earnestly to do regular maintenance ( Regular inspection) 。 Through proper periodic inspection, do early detection of fault, prevent accident arrangement is very important to increase productivity and efficiency. Identification of failure: 1, through the voice identification method of failure: through the voice recognition need to have a lot of experience. Must go through adequate training to achieve voice can identify the bearing and the bearing. Therefore, should as far as possible from staff to carry out the work. With listening gear or listening bar on the shell can be clearly heard the sound of the bearing. 2, through the work temperature identification belong to compare recognition method, this method is limited to use in place of running condition is not change. Therefore, must carry out continuous recording of temperature. Failure, the temperature rises not only, still will be irregular change. The method and voice recognition method and advisable. 3, through the state of lubricant, and the recognition of lubricant sampling analysis, through its pollution degree, whether into foreign body or metal powder, etc. The method for larger cannot close observation of bearing or bearing are particularly effective. Bearing in the factory are coated with the right amount of anti-rust oil and antirust paper, as long as the packaging is not damaged, the quality of the bearing will be guaranteed. But long stored in humidity below 65%, the temperature is 20 ℃ about conditions, the shelf in 30 cm above the ground is advisable. In addition, the place should avoid direct sunlight or of safekeeping and touch the walls of the cold.