Guangzhou shenzhen bearing factory bearing the correct installation method

Guangzhou shenzhen bearing manufacturer can show bearing correct installation method of bearing right device will affect the precision of using life and performance. Therefore, design and assembly department should energetic discussion bearing device. Expected to stop device work in accordance with the specification. Practice project is as follows: ( 1) Cleaning and high temperature bearing and bearing related parts ( 2) Check size and finishing of the parts ( 3) Device ( 4) Bearing assembly after checking ( 5) Supply smooth agent hope until device recently opened bearing package. Ordinary grease is smooth, do not wash, direct filling grease. Don't stop smooth clean smooth oil. But, for the instrument or the use of high speed bearing should use clean clean oil, to remove rust inhibitor on the bearing. From the bearing is easy to rust, rust inhibitor and therefore cannot be ignored. In addition, has been used without cleaning grease seal bearing direct use. Bearing device method on the basis of the structure of the bearing, cooperate and conditions. Usually, due to the rotation of the shaft, inner ring interference fit. Cylindrical hole bearing, with the press into or hot device. If be cone hole, the device on the cone shaft or sleeve directly. And the device to the housing will produce many clearance fit, and the outer ring will produce interference, so usually, press, turned the pressure into or shrink fit way after cooling device. When using the dry ice as a cooling agent and using cold stop device, the moisture in the air condenses on the bearing surface. Therefore, needs to take the appropriate anticorrosive measures. On an article: guangzhou, dongguan city bearing manufacturer to demonstrate how the bearing resistance to high temperature under a: guangzhou qingyuan city bearing manufacturer summary finishing bearing