Grease filling of bearing operation and the consumption of large - bearing grease

According to the 2016 China's auto market research report, according to the current terminal market, including automobile, practical use of lubricating oil and grease crowd there is a misunderstanding. Also don't know to use knowledge and operation method, lead to the use of frequent accidents. By the authoritative department detection, more than 90% are caused by improper operation and use the right way to use the accident, the reason is probably points for three reasons. 1. Relative to the lubricating oil, people usually don't pay too much attention to the brand, quality and grade of the grease and other factors, often can produce a bias to grease, think it is not important is oil. 2. Operating cost into consideration, the garage boss will try to compress cost more profit, cause will be more and more willing to choose a cheaper product, rather than the quality of relegation. 3. The garage and flow typically more butter for the intellectuals, itself has no culture, also never received lubricant manufacturer and equipment manufacturer's technical training, every day in doing the dirty and tired of living itself also does not have the opportunity to learn and ideas. Most according to their willingness to work, no process and specifications. The filling quantity of the grease had a great influence on bearing operation and the consumption of the grease. Bearing always fill too much grease can make bearing friction torque increases, cause the bearing temperature rise too high, and lead to the loss of the grease; Still can cause a redundant grease filling excess fat from leakage of lubricating components, bring adverse influence mechanical operation. On the other hand, the filling quantity is insufficient or too little dry friction and damage to the bearings may occur.