Good habits of non-standard bearing maintenance in the equipment used is very important

Good habits of non-standard bearing maintenance is very important in equipment used in source: bearing | last updated: - 2020 07 - 15 for non-standard bearing the special bearing is not standardized, on many occasions is likely to be used, and to a large degree on applications where the environment is relatively poor, use for a long time, the maintenance cycle is long. So how to carry out maintenance has become a need to focus on research topics. As a kind of steel structure of non-standard bearings, once appear rusty phenomenon, can affect to the service life of non-standard bearings, so we should try to avoid non-standard bearings come in contact with water. If non-standard bearing is applied to some of the more bad environment, it is for the water erosion is inevitable, so for steel waterproof the most basic way is to apply a layer of anti-rust oil, evenly daub on bearing a layer of anti-rust oil or it is placed it to soak in the antirust oil, make its surface adsorption layer of anti-rust oil, and can be through the control of the oil temperature to determine the thickness of the oil. Another way is to use the rust cleaning detergent for non-standard bearing, and then use dry cloth will be wiped clean the surface of the non-standard bearing, the dip in a cleaner brush on it evenly wash is ok. Second can also use chemical cleaning methods, the use of a chemical preparation to remove rust, then put the bearing chemicals to immerse inside, after to rust has been cleaned up to be wiped out. Want to avoid non-standard bearing corrosion method still has a lot of, depending on the bearing use environment, the clean method also each are not identical, clean way to choose to suit the environment to remove rust easily. Also it is important to note should avoid non-standard bearings used in strong acid, strong alkali environment.