Extend the combination of INA bearings use cycle maintenance and care

In the combination of INA bearing device, if not serious stop alignment, alignment combination can cause INA bearings to suffer another load, friction, and vibration. These could accelerate fatigue and reduce the use of the bearing life, and it might damage the other machine parts the use of the term. In addition, the increase of vibration and friction could significantly increase the risk of energy cost and premature failure. In order to make full play and to sustain their proper bearing performance, truly necessary to do regular maintenance (care Regular inspection) 。 Properly checked regularly, do early detection, prevent accidents in already, is very important for progress rate of consumption and economy. Inspect, clean combination of INA bearings will be removed, with photography measures such as well first recorded appearance. In addition, to confirm the quantity of residual smooth agent and the smooth agent, sampling, and then clean the bearing. A, bearing cleaning rough washing and fine washing to stop, and can be put in use at the bottom of the container on the metal frame. B, coarse, with a brush in oil and other things clear smooth fat or adhesive. If at this time in oil rotation combination of INA bearings, pay attention to due to foreign bodies such as damage to the rolling surface. C, fine cleaning, turn gradually in the oil bearing, must stop seriously. Usually use detergent for neutral aqueous diesel or kerosene, according to the demand is also sometimes used warm lye, etc. No matter use which kinds of detergent, often should filter stick to clean. 2, checking and judging to discriminant can remove the combinations of INA bearings to apply, to inspect the dimension precision, rotating accuracy, internal clearance and the matching surface, raceway surface, adhere to the rack and seal rings etc. 3, fundamental condition monitoring during the period of using, often to the United States combined INA bearing stop monitoring operation of external conditions, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and will avoid unexpected machine to suspend the phenomenon, make the spending plan, to be completed, the progress of the factory spending power and efficiency. 4, again in the process of operation, smooth bearing request has the correct smooth again, its performance. Bearing smooth way, divided into oil and grease smooth smooth. In order to make the bearing function well, first of all, to choose appropriate use condition, the purpose of smooth solution. If only consider smooth, oil slick smoothness is preferred. But there are fat smooth can simplify bearing structure around the expertise. 5, unloaded when bearing will reach its final use period of time, should be traded off. Is bearing can not be used, but properly unloaded the original INA bearings, timely exchange of new bearing, the new combination of INA bearings use can play a good role in promoting the extension of life span. First of all, the usefulness of the appropriate way to unload tools will help prevent damage on other machine components, second, incorrect unload technology can be a hazard to the operator.