Explore the non-standard bearing maintenance RunHua method

Explore the non-standard bearing maintenance RunHua method source: bearing | last updated: - 2020 10 - 04 explore non-standard bearing maintenance RunHua methods according to the suitable position and application of standard specifications, according to the natural environment standard choice precision and adaptation of non-standard bearings, bearing life and reliability is the premise. Position of use: apply to undertake non-standard bearing dominated the axial and radial axial and the coordination of the axial load, generally USES two non-standard bearings, its key parts should be in the car before and after the left and right wheels, active circular gear shaft, transfer case, speed reducer drive system such as position. Allows the speed ratio, appropriate, RunHua good natural environment, the limit allowed speed ratio is bearing limit speed than 0. 3 - 0. 5 times. Usually in normal cases, the limit speed ratio is 0. 2 times the most suitable. Permissible Angle: non-standard bearings are usually not allowed on the axle housing with dip Angle, Angle, if any, shall not exceed 2 'biggest. All allow temperature: under normal load, under the standard of lubricating wet, high temperature resistance and enough normal bearing can be in - 30 c - 150 c operation.