Even bearing shaft preservation and installation guide

Even bearing shaft preservation and installation guide water pump shaft bearing is fine element, the storage should be especially careful about using. When the water pump shaft bearing in the factory are coated with the proper anti-rust oil and antirust packing, just the packaging is not damaged and the quality of the bearing will be ensured. When registering, in humidity below 65%, the temperature is 20 degrees at the mercy of conditions, it is advisable to send the shelf there are 30 cm above the ground. Other, storage place to avoid direct sunlight or with the metope of cold touch. Water pump bearing is fine mechanical parts, devices need to watch carefully. Adhere to the bearing and the surrounding environment clean, device to clean, check the shell and the flange, impeller, water seal. Bearing admit processing quality conform to the requirements of the technical documents and no scar or leave the burr, cutting machining. Device should be used when appropriate, avoid shaft accept intense impact and scars, cracking and other damages. When the device is bearing in the shell, it is necessary to pay attention to avoid the device works for the rolling ball. In order to avoid this situation, it is necessary to use auxiliary and outer appearance only touch, and should use mechanical pumped. When device, water pump shaft, impeller and mechanical seal of the inner hole and spindle control is necessary. It is necessary to use mechanical pressure, shaft with the other end it is necessary to be supported in order to avoid transfer force applied to the ball. In all use temperature range, the shell and function of the bearing outer ring cooperation is necessary to adhere to. Upward force is necessary to supply to meet together to avoid deformation of the channel. If the interference is too light, bearing will slip out of the shell, if cooperation is too heavy, channel deformation happens. Jiaxing bearing co. , LTD. Is a company specializing in the production of automotive water pump bearing, shaft bearings, water pump bearings professional manufacturers, the company strictly in accordance with the quality of customer requirements and time to provide error-free, with cost-effective products and services, continuous improvement, to ensure customer satisfaction and trust and continuously exceed customer's expectations! More information please visit: a: shaft under the bearing should be installed in under the guidance of professional personage: shaft even bearing manufacturers to introduce the permanent magnetic bearing is how the operation of the relevant tags: auto water pump bearing, shaft bearings, water pump bearings, auto water pump bearing related news which cases will fever auto water pump bearing thermal and bearing performance of engine cooling system of key parts of automotive water pump bearing water pump bearing why use general auto water pump bearing grease appears channeling dynamic circumstance how to deal with related products