Encounter slow don't panic

Speed reducer failure? The use of gear speed reducer drive is very high, in many common electrical equipment basic gear reduction can see in the picture. For such a high utilization rate of equipment, you will inevitably encounter all sorts of problems, such as the noise is too big, the damaged parts, and so on, so the common experience of similar failure, we how to solve? Speed reducer failure? A, tooth broken if gear tooth reducer is broken, it can only be with the same model to replace the new one. Second, the bending axis gear speed reducer after operation need to work for a period of time, in case of shaft bending, can at the same time through the technology of press straightening. Three, reducer junction surface leakage. Reducer after opening, replace the washer or coated with sealant. Speed reducer failure? Four, wear problem 1, reducer bearing chamber wear, high temperature impact, including through the shell and the high temperature lead to high temperature bearing box, the casing hole for the bearing chamber, transmission of high temperature bearing chamber of wear and tear. 2, the axis of the wear reduction gear shaft, described the main shaft head wear parts, key way. 3, speed reducer drive shaft bearing high temperature impact wear. Generally speaking, the plating can be used to restore the precision of parts. A: there are several reasons for, wear and tear of bearing next up: none