Encounter non-standard bearings need how to deal with when temperature is too high?

Encounter non-standard bearings need how to deal with when temperature is too high? Source: bearing | last updated: - 2020 07 - 10 non-standard bearing life is closely related to manufacturing, assembly, use, and must be made at each link to make the non-standard bearing in optimum operation state, so as to prolong the service life of non-standard bearings. 1. How to deal with the influence of non-standard bearing temperature is too high ( 1) 。 ( 2) 。 Machine by hydraulic mechanical failure bright light plate, indicates the instrument temperature, non-standard bearing temperature signal relay action. ( 3) 。 The thermometer plate ( Inflating the thermometer) Black stitches overlap or more yellow and yellow needle. ( 4) 。 A non-standard bearing temperature fault signals. 2. The causes of high temperature phenomenon (non-standard bearing 1) 。 May is the bearing of the cooling water, high temperature phenomenon. ( 2) 。 May is a standard bearing oil degradation, the CPC degradation, oil itself is not clean or run. Such as the moisture in oil increase can cause the acidity of the oil, can reduce oil lubrication, the bearing shell was corrosion, thus caused the phenomenon of non-standard bearing temperature. 3. Non-standard bearings in the treatment of high temperature occurs when the non-standard bearing temperature rises, the first to determine whether there is an error action, if the temperature is indeed rising, should immediately do the following treatment: ( 1) 。 Check the cooling water pressure, water flow and pipeline system is normal. If water is likely to be lower filter blockage, cannot be handled in a timely manner, to stop treatment, when confirm can work, then put into use. ( 2) 。 Should be to check if the governor oil pressure, oil pressure is low can lead to cooling water hydraulic valve closed.