Eccentric bearing factory introduced the overall derrick bearing lubrication and maintenance methods

Self-lubricating bearing factory includes monitoring working condition, make up for, or replacement of lubricants, open check regularly. As matters of maintenance in the work, with all the offset the rotation of the turning arm bearing sound, vibration, temperature, the condition of the lubricant and so on. 1. Oil bath lubrication oil bath lubrication of the bearing is common in imported bearing lubrication method, suitable for low, medium speed, bearing lubrication. Immersion in the groove of FAG bearing part, the bearing parts of lubricating oil by rotating, then flow back to the oil level of oil tank should be slightly lower than the lowest at the center of the roll body. 2. Bearing lubrication drops of oil lubrication is suitable for need to ration oil bearing parts, a single every 3 - drops of oil A drop of it is advisable to 8 seconds, too much oil will lead to all the offset turning arm bearing temperature increases. 3. Circulating oil lubrication of the bearing with oil pump will be filtered oil walks to the bearing parts, by FAG bearing lubricating oil filter cooling after use. Due to circulating oil can eliminate the heat must be bearing cooling, therefore method suitable for high speed bearing parts.