Coordinate adjustment method is the best way to install high-speed FAG bearing

We usually at the time of installation of high-speed FAG bearing, avoid the mistakes we will use the adjusting method, in order to ensure that FAG bearings after installation of raceway small deformation, the amount of interference interference fit can't get too big, and under the high speed centrifugal force and high temperature thermal expansion, or on the surface of the offset with the normal pressure. Or make the fitting surface relaxation, thus interference quantity must under the premise of considering these two factors determine prudently, effectively under the constant velocity of the amount of interference for high-speed FAG bearing may be invalid, if calculated results this contradiction is too big, Usually it happens only under ultra-high speed) 。 Only under the ring lubrication and hydrostatic lubrication and lubrication measures, and this scheme has the potential to FAG bearing value above 3 million mark. When considering the high-speed FAG bearing clearance not only should consider the above-mentioned factors, and to consider the influence of the axial thermal elongation of clearance, FAG bearing under working state, namely in the working temperature is the best clearance, clearance is, and this, the outer ring groove ball center accurate registration form of the condition.