Cleaning of tractor diesel engine lubrication system

The tractor 2019 - clean diesel engine lubrication system 07 - 11 discipline accountability and all moving parts must have a diesel engine oil lubrication, to guarantee the normal work, if the lubrication system has fault, intensified light moving parts wear and tear, or tile burning, serious accidents such as cylinder. Therefore, master the correct maintenance method of lubrication system, not only can prolong the service life of the engine, but also can improve engine performance and fuel economy. Tractor diesel engine lubrication system should be regularly cleaned and specific methods are as follows: 1. After the engine flameout, strike down oil plug, let out dirty oil. 2. Clean oil filter, fine filter shell, replace filter, and then loaded ( Some models are cleaner overall change) 。 3. Oil sump cleaning, clean after installed. 4. To join the new oil, loosen the oil radiator return pipe joints, turn the crankshaft, make out the new oil in the radiator to clean oil, until all out new oil again and make up new oil well tubing. 5. Under the condition of all engine decompression, use the starter machine host 2 ~ 3 minutes ( Small tractors available starting crank shaking machine 2 ~ 3 minutes) , making new oil squeeze residues in bearing parts, such as dirty oil on the surface of the work, form a new lubricating oil film. 6. Cleanser. Diesel engine after long-term use, impurity cannot be out of the combustion chamber after the oil or oil, sometimes an oil change also can't solve this problem, you need to in join carbon removal liquid when idling engine oil change, let the fluid out of the oil can't out of the impurities. Generally 6 ~ 80000 km will need to clean, to make the service life of diesel engine is greatly increased. Using special cleaning fluid, can effectively remove the engine lubrication system and the friction on the surface of the carbon deposition, glue and other sediments, dung. Clean diesel engine without will remove machine, cleaning equipment, using joint and engine oil imports and oil discharge port connection.