CK-A50110 one way bearings

CK-A50110 one-way bearing is a wedge-type one-way clutch, which belongs to the series of wedge-type one-way clutch without bearing support. ‌ The radial size of this kind of bearing is the same as the standard bearing size. When used, it needs to be installed with the bearing to withstand axial load and radial load. ‌The standard installation method is that the CK-A model is coaxial and side by side with the bearing, ‌the same tolerance requirements. ‌The inner and outer rings are keyed to the shaft and hub. ‌CK-A50110 one-way bearings are commonly used in elevators, ‌conveyors, and mechanical equipment such as packaging, ‌printing, ‌food, ‌medical, ‌textile, ‌chemical industry, etc. ‌During use, ‌if the surface temperature of the clutch is detected to be above 60 degrees Celsius, ‌should check the coaxiality of the adjusting shaft and flange, ‌check the grease once a month, and ‌add grease in time. ‌No lubrication and wear inside the clutch will directly lead to a significant reduction in clutch life