Automatic gantry crane slewing bearing oil device

Automatic gantry crane slewing bearing oil device - 2020 02 - 26 caofeidian port group co. , LTD. , general terminal branch li bo innovation studio portal crane is port wharf apron loading and unloading of generic break-bulk or bulk port cranes, and the main general port loading and unloading of hoisting machinery. When in operation, portal crane slewing bearing use frequency is high, the lubrication cycle is short, to produce large amount of waste oil. But due to the center of the door machine center are installed in the pillar by electric appliances, interior space is limited, and for the ladder from top to bottom, affected by the environment, clean-up time-consuming, laborious and get an electric shock, slip potential safety hazard exists. Aiming at this situation, general wharf li bo innovation studio using existing technology, independently developed a gantry crane slewing bearing oil device automatically. The device with the top of the base welding on the rotary body, bottom as opposed to a transfer back to the oil pan, oil scraper plate bracket upper square socket inserted within the regulating sleeve, adjust the bolt and the wiper plate bracket upper square outside of the sleeve cap is tight connection, two pieces of the wiper plate respectively through the retaining bolt connection on the wiper plate bracket on both sides of the lower plate, the lower side of the two pieces of the wiper plate and transfer back to the contact area of oil pan, oil pipeline is located at the back below the transfer of the oil pan disk, the lower end of the pipeline connected to set oil drums. Gantry crane slewing bearing automatic oil devices can make use of the rotation of the rotary bearing power, will connect plate waste grease gathered in waste oil barrels of oil, lubrication personnel only regular will waste oil barrels out of the center pillar can, greatly shorten the time to clean up the old grease lubrication personnel, reduce the lubrication staff labor intensity and ensure the operation safety of lubrication work more. The subsequent li bo innovation studio will continue to track crane slewing bearing automatic oil device operation effect, and actively promote the optimization of the device improvement work.