Quick Details
Place of Origin:
SHANDONG, China
Brand Name:
WXING
Warranty:
2 Years/50,000 miles
Certification:
ISO 9001
Type:
/
Car Model:
for Toyota, Honda, Nissan, Mazda, Isuzu etc.
Engine Code:
According to Vehicle Brand
Size:
15*12.5*11
Application:
Japanese vehicle brands
Features:
OEM Fit, Easy to Install
Tensioner bearing:
C&U Bearing
Tensioner Pulley:
from INA OE Supplier
Defect Rate:
0.0005
Annual Production:
2,400,000 sets
Quality Level:
OEM for global brand
Supply Ability
Supply Ability:
2400000 Piece/Pieces per Year
Packaging & Delivery
Packaging Details
Cedars Packing for belt tensioner. Customerized packing is acceptable.
Port
QINGDAO port
Picture Example:
Lead Time :
Quantity(Pieces) 1 - 500 501 - 1000 >1000
Est. Time(days) 35 45 To be negotiated
Product Description
Product Name | New Adjustable Auto Engine Drive Belt Tensioner and Pulley |
Application | Japanese vehicles: Toyota, Honda, Nissan, Mazda, Isuzu etc. |
Material | Main components are from OEM Suppliers |
Size | Perfect OEM replacement, OEM Fit |
Tensioner Material
Cedars tensioners main components are from OEM suppliers, which guarantee it no skidding, no noise and long service life.
Quality Control
To achieve reliable products, all the main components are directly sourced from OE suppliers.
Quality inspections are strictly carried out with modern equipment and technologies during every step of production. Anti-fatigue
and other tests ensure that our parts meet the rigorous durability and precision requirements.
1. 14 years experience
2. 5 automated production lines
3. 21,000 square meters
4. 2,400,000 sets of annual capacity
5. Full processes of stamping, machining, plastic injection & assembly
6. Continuous process improvement & staff training
7. Independent product development
Typical Failures
Pulley bearing wear.
Appearance: With the engine off and the belt removed, manually rotate the pulley. If you notice noise, resistance or roughness, the problem is likely to be pulley bearing wear.
Cause: Defective bearing and/or pulley.
Pulley surface wear
Appearance: Flat and grooved surfaces should be smooth and free from chips, cracks and dents. The high points of the grooves should not be worn down and be of equal height. Plastic pulleys have fins in sidewalls that should not be cracked or broken.
Cause: Belt wearing into the pulley.
Rust bleed and cracks
Appearance: Rust is bleeding between arm and base or dripping from the tensioner. Also, check the tensioner for cracks or damage to arm, housing and bracket. Some damage can’t be seen unless the tensioner has been removed.
Cause: Rust bleeding or dripping is a sign of internal component wear. Most common crack damage occurs at tensioner “stops” and mounting
