And ring gear dust seal way of improvement

Improvement in 2018 - and ring gear dust seal way 07 - Leader 30 protecting YuChunTao ( Jiangsu donghua textile co. , LTD. ) At present most of the spinning frame front or the rear of the drive gear lubrication, drip lubrication device of gear oil pump is used and there is also a part of using spray lubrication, especially using the pour oil lubrication recycling spinning frame, on the front and the rear roller and cover seal between put forward higher request, require good sealing effect, fly linter into less. Now mostly use rubber or plastic board, cut into comb to seal, the sealing effect is poor, flat to wipe the car disassembly inconvenience and easy damage; Even there are many companies will damage the seating directly take out, make the gear are more likely to stick on the fly and linter, reduce the lubrication effect; Due to fly into the linter, using spray oil and lubricating oil filter reuse, the mesh is more likely to become blocked, make the oil filter cannot be recycled, cause the gear oil shortage, bad lubrication. Against the sealed condition, after careful analysis found that the general fixed, and the frame of textile enterprises roller center distance which is without big changes in the product without separation. Therefore, we consider the use fixed seal plate cutting roller and cover, can effectively prevent the fly and short-staple intrusion. Take two pieces of 3 mm thick rectangle organic glass, in the end according to the shape of the space of the roller, the dug a semicircle closely relevant to Laura, and then on the organic glass glue the flannelette ( Like the processed glass shape) , flannelette semicircle about 0. About 5 mm ( To enhance the sealing effect) And the other on the organic glass Mosaic fixed two strong magnetic steel, glue the handle, sealing plate; Due to strong magnetic effect, as long as the seal plate on the front and the rear by roller cover, the seal plate will be adsorbed on the iron housings, fit, and with the roller gear transmission part of the front and the rear of the car can keep clean for a long time. The sealing plate sealing performance is better, modification cost is low, and flat car, wipe and disassemble because it is worth using for reference. Source: the cotton textile technology, 2017, 6