Agricultural machinery industry in jiaxing bearing application knowledge: the main cause of farm machinery oil seal leakage

There is rotational, have HRB bearing ( ) Agricultural machinery industry in jiaxing bearing application knowledge: the main cause of farm machinery oil seal leakage. Jiaxing bearing group sales co. , LTD. ( The company) Is in jiaxing bearing group set up by the spot sales window, specializing in HRB brand bearings, existing stocks of 50 million yuan, covers the whole bearing, have very strong cash supply ability. The main cause of farm machinery oil seal oil: 1. New or overhaul farm machinery, after not in strict accordance with the technical procedures of break-in and after running-in maintenance work, brought down from the internal grinding machine of metal debris into oil seal, abrasive wear, result in oil seal of the early damage. 2. Do not pay attention to clean when install oil seal, so that the impurities and dust into the oil seal and shaft seal have caused wear. 3. When installation, machinist know machine shaft has obvious scratch and burr, still the oil into the machine, the oil seal strain; Or oil with crankshaft tightness is not enough, caused by oil seal oil. 4. Will have obvious deformity, aging, crack of the oil seal installed on the machine, oil seal leakage. 5. Improper operation during assembly, the oil seal deformation, even lead to oil seal since the spring fall off, lost and cause oil leakage. 6. Oil seal since the tight spring tension is not enough, poor sealing, caused the spill. 7. Agricultural machinery, speeding often led to install oil seal of rotating shaft speed exceed adaptation degree of oil seal, oil seal leakage caused. 8. Oil seal on the machine shaft installation position is not correct, such as small tractor frame since the tight on the drive shaft oil seal and the skeleton rubber oil seal installation position on the contrary, or skeleton opening toward the upside on shaft, and cause the oil; And like a seal on the machine shaft installation is not correct, lead to the center line of the oil seal and the shaft centerline is not overlap, and the oil generation. 24-hour customer service hotline: if you are more interested in jiaxing bearing manufacturer introduces industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: HRB bearing company sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source