Affecting the precision of the non-standard bearing and way of life

Affecting the precision of the non-standard bearing and life source: bearing | last updated: - 2020 07 - 17 affecting the precision of the non-standard bearing and way of life the installation of automatic self-aligning ball bearing is correct, directly affecting the service life of bearing used in precision, and performance. ( 1) When cleaning a lot of automatic self-aligning ball bearing, first with a temperature of 90 ~ 100 ℃ heat oil pour hot to melt encapsulated oil, at the same time with seamless all mouth and no net exfoliation tools to dig old oil, then pour hot a few minutes, then rinse with kerosene oil, clean with gasoline again finally. On film gloves should be worn after washing clean, automatically self-aligning ball bearing on the worktable of dry clean cloth or paper. ( 2) Before automatic self-aligning ball bearing installation, should use the appropriate measuring tools according to the provisions of the technical requirements on the design drawing check the shaft and hole and machining quality of parts ( Such as dimensional accuracy and shape accuracy and surface roughness, etc. ) 。 ( 3) When installed in the open the packaging automatic self-aligning ball bearing, put it into the liquids such as gasoline with handle gently gently turning, to ensure the cage, encapsulated oil on the surface of the rolling element and raceway thoroughly washed clean.