Affect normal operation of IKO roller bearing fault handling matters

1. IKO import bearings in use process because of itself quality and external conditions, the bearing capacity, rotational accuracy and wear-resisting performance will change. When the outer spherical bearing performance index is lower than the use requirement and when not working, bearing a malfunction or even failure, has taken place after the accident situation such as rolling bearing in the event of failure, machinery, equipment will halt, appear to wait for all sorts of anomalies, loss of function causes were therefore need to find out in the short term, and take corresponding measures. 2. The vibration of the bearing vibration of the bearing to bearing failure effect is obvious. Such as peeling, indentation, rust, crack and wear will be reflected in the bearing vibration testing, so through the use of special rolling bearing vibration measuring device ( Frequency analyzer and vibration meter, etc. ) Can measure the size of the vibration, through frequency distribution can be deduced, under the condition of abnormal vibration measured values due to the use of the bearing condition or sensor installation position and different, so need prior to each machine after the analysis and comparison the measured value of decision criteria to determine. 3. The temperature of the bearing temperature usually bearing as operation began to rise slowly, 1 to 2 hours to reach a steady state. IKO bearing the normal temperature of heat capacity, heat dissipating capacity, rotational speed and load of machinery. If the lubrication, installation is not appropriate, the bearing temperature will go up sharply, there will be unusually high temperature, then must stop and take the necessary precautions. IKO bearings imported materials metallurgy quality used to be the main factors influencing the premature failure of the rolling bearing. As metallurgy technology, For example, the bearing steel vacuum degassing, etc. ) Progress, raw material quality is improved. Raw material quality factor in the bearing failure analysis share has declined obviously, but it is still one of the main influencing factors of rolling bearing failure. Select material adequacy is still bearing failure analysis factors must be considered. A, bearing keep cleaning c b, bearing and its surrounding, the installation position of size and processing quality of test installed d, e, after inspection, remove the g f, maintenance ( Regular inspection) H, a supplement to the lubricant