About imported SKF bearing external devices refueling and in oil - bearing knowledge correctly

As we know, import bearings at the core of a lot of machinery and equipment parts, play an irreplaceable role. But as the peripheral equipment of the imported bearing, so we should give enough attention. Check the oil level, if found oil shortage, should from the oil filler or a hole filling, added to the oil hole oil or oil level reached the limit of the scale. The oil change, you need to discharge of oil, oil discharge oil temperature should reach 40-50 ℃, and the oil should be in the case of a disturbance emission, such ability can be thoroughly row of net oil dirty and clean. Such, lubricating oil discharge before, you should start the roller first warm hot oil, so that the heat flow out faster, the impurity in the box body sewage discharged mixed with oil, more easily. For drive axle and wheel planetary gear reducer and vibrator oil chamber, because they are exposed part of the shell is rotating, so when check the oil level or put oil and gas will all need to start the machine oil hole position to the appropriate position. When check the oil level or filling lubricating oil, the oil hole rotation can be marked by the horizontal position, should make oil level at oil hole edge so far.