90% of bearing heating method here

Bearing there are many kinds of heating methods are familiar, such as oil bath, flame, burning baking, hammer, etc. , but bearing the new efficient environmental protection equipment is rarely known. The author is the brief introduction to the method of bearing heating. Oil bath: this kind of bearing heating method was used by many old engineer, need longer heating time, and will be contaminated by oil dirty bearing lead to bearing failure in advance. The biggest risk is operating the personal safety of workers, require operators need to be careful to be careful when operating. Flame: control is very poor, poor control temperature, can lead to bearing damage, also the personal safety of operating workers. Gas cutting baking: heating temperature is too high, easy to damage the bearings, and bearing protection oil can produce poisonous gas, endanger human body health. A hammer: simple and crude, a bit not note may be bearing hit crooked, then need to take great strength to install the bearing down again. Bearing, a bearing heating method is popular in recent years, its high efficiency, safety is an important factor in many customers choose it. When selecting a bearing manufacturer also need to be very careful, only regular brand products to ensure your safety and efficiency. Please look for the WTR official hotline:!