Unlike other thrust bearings in the sample, these bearings have a very high axial load capacity and can withstand several radial loads while being subjected to axial loads, but the radial loads must not exceed 55% of the axial load.

As long as the loads P and P0 do not exceed 0.05C0 and the shaft rotates, the bearings allow the centering angles listed in the table below.

Bearing Diameter Series Self-aligning Angle Bearing Diameter Series Self-aligning Angle 200 Series 1°~1.5°300 Series 1.5°~2°400 Series 2°~3° Small values are suitable for larger bearings, and are allowed when the load is increased. The centering angle will decrease.

Oil lubrication is generally used when in use.

Thrust tapered roller bearings can only bear one-way axial load and can limit the axial displacement of the bearing in one direction, so it can be used as one-way axial positioning. Compared with the thrust cylindrical roller bearing, the bearing capacity is large, the relative sliding is small, but the limit rotation speed is low.